• Leading Tech Since 1997
  • / 1-800-711-6277
  • Home/Makers/Pocket PiGRRL
  • Pocket PiGRRL

  • Sorry, this product is not currently available for purchase.
  • Pocket PiGRRL Pack Build your own Pi Game Emulator! - CASE NOT INCLUDED

  • MAIN
      • MAIN
  • For all those who feared their Game Boy days would be but a memory, worry no more! The Game Boy may be dead, but with this pack you'll have a chance to revive it in style. Adafruit's collected all the right parts so you can assemble the guts of your very own DIY GameGRRL - a portable Raspberry Pi running MAME, NES, Atari2600 and other fine emulators (via RetroPie/EmulationStation)

    It's called the Pocket PiGRRL and it's powered by a Raspberry Pi Model A+ and a PiTFT display.  You'll have to do all the assembly and installation yourself to get gaming, but Adafruit's learn guide will help you get through the process.

    Please note this is not a professional product! It's a DIY kit, and is great fun to build, but it may not have great emulation, video, audio etc.

    The Pocket PiGRRL Pack has just about everything you need to make this project EXCEPT the case. You will need to 3D print your own case - but check out our 3D printing guide for the pack so you or your friend can 3D print an enclosure. You will also need to solder together the parts so many hand tools and other small parts such as screws or blue tack are required. Please read through the tutorial so you can see what else is needed to complete this project

    Powerboost may have an off-white or black JST connector.

    This pack includes:

    1x Raspberry Pi Model A+ 256MB RAM
    1x Adafruit PiTFT 2.4" HAT Mini Kit - 320x240 TFT Touchscreen
    1x PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C
    1x Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302
    1x Lithium Ion Battery - 3.7v 2000mAh
    1x Adafruit Perma-Proto Half-sized Breadboard PCB - Single
    1x GPIO Ribbon Cable for Raspberry Pi Model A and B - 26 pin
    1x Tactile Button switch (6mm) x 20 pack
    1x Tactile Switch Buttons (6mm slim) x 20 pack
    1x Tactile Switch Buttons (12mm square, 6mm tall) x 10 pack
    1x Mini Metal Speaker w/ Wires - 8 ohm 0.5W
    1x Breadboard-friendly SPDT Slide Switch
    1x SD/MicroSD Memory Card (4 GB SDHC)


  • Thanks for signing up!
    Dynamism is the leading provider of 3D printing solutions, with expertise in hardware, software, and training.
    US/Global   United States and Global
    Copyright © 2020 Dynamism   All Rights Reserved.
  • Copyright © 2020 Dynamism
  • Full site version
  • Select 1-3 products to
    compare in a chart.
  • For sending a wire transfer or issuing a purchase order.
    We accept POs only from government and academic institution or Fortune 500 companies.