Tech Specs
-
System
Cooling Mode: Forced Air Heat Exchanger with Recirculating Water
Gantry System: Linear Ball Bearing Shaft Y-Axis, Rail Guideway X-Axis
Driving System: Nema Stepper Motor
Supported File Types:
Engraving: JPG, PNG
Cutting: PDF, vector file -
Laser System
Working Current: 20mA
Laser Power: 40W
Eye Protection: No Protective Laser Eyewear Required
Beam Size: 6.5 mm diameter @ 1.2 m
Wavelength: 10.6 ÎĽm
Laser Type: Sealed CO2 Laser Tube
Laser Classification: IEC 60825-1 Class 3R -
Standard Equipment
Hex Box Integrated Cooling and Air Assist System
Integrated Ground Fault Circuit Interrupter (GFCI)
Integrated Exhaust System
Honeycomb Aluminum Plate for Ventilation
Wide Angle, High-Def Camera
Focal Lens: 2”
Red Dot Pointer: Integrated Beam Combiner
Z-Axis: Manual Laser Head Focus -
Weight and Dimensions
Shipping Weight: 45 kg [100 lbs]
Operating Capacity:
Engraving Area: 46.7 x 30.5 cm [18.4 x 12 in]
Cutting Area: 50.8 x 30.5 cm [20 x 12 in]
Max Engraving Height: 32 mm [1.25 in]
Max Cutting Height: 6 mm [.25 in] Wood and Acrylic
Laser Cutter Weight (without Hex Box): 28.7 kg [63.3 lbs]
Hex Box Weight: 4.5 kg [10 lbs]
Laser Cutter Dimensions: 81.3 x 50.8 x 21 cm [32 x 20 x 8.25 in]
Hex Box Dimensions: 18.4 x 27.9 x 18.4 cm [7.25 x 11 x 7.25 in] -
Operating Environment
Recommended Environmental Temperature: 16-29 C [60-85 F]
For indoor use only. Requires sturdy, flat, and level workspace that can hold the weight of laser cutter, material, and Hex Box™. -
Computer Requirements
Supported OS:
Mac OS X v10.9 or later (Mavericks)
Windows 10, 8.1, 7 SP1
Browser Compatibility: Chrome, Safari, Firefox, IE
Minimum Screen Resolution: 1024 x 768 Pixels
Connectivity: Network (WiFi or Ethernet) without Internet connection
Wireless Connection Frequency: 2.4 GHz -
Electrical Requirements
LC40 Input Rating: 120V / 60Hz / 6 A
Hex Box Rating: 12V DC, 4.7 A