UltiMaker 3

UltiMaker Filament Guide Assembly

Please note: compatible with UltiMaker 3/3E/S3/S5

This is the print head assembly for the UltiMaker 3 and UltiMaker 3 Extended. It includes the printhead cable, fans, and nozzle seal.

Note: There are two versions of the nozzle cover/nozzle seal and metal bracket for the UltiMaker 3 family of printers. This printhead includes the updated nozzle cover/nozzle seal (translucent) and metal bracket with two teardrop shaped holes in the openings at the bottom of your printhead.

Compatible with UltiMaker 3 series printers.

Feeder Right Assembly (Feeder 2) for UltiMaker.

Compatible with UltiMaker 3 series printers.

Feeder Left Assembly (Feeder 1) for UltiMaker.

Compatible with UltiMaker 2+ and 3 series printers.

Feeder Motor Assembly Please note: compatible with UltiMaker 2+/E+/3 models only

Print Head Cable 

For use with UltiMaker 3 / 3 Extended

The silicone nozzle cover on the UltiMaker 3 and UltiMaker 3 Extended fits on the underside of the printhead to help keep the temperature stable and prevent back-flow of filament.

Note: Sold individually. There are two versions of the nozzle cover/nozzle seal and metal bracket for the UltiMaker 3 family of printers. These nozzle covers will fit the version with two square shaped holes in the openings at the bottom of your printhead.

If they are teardrop shaped, you will want this version.

Axial (Hot End) Cooling Fan for UltiMaker Please note: compatible with UltiMaker 3/3E/S3/S5 models

Header Cable Clip for UltiMaker Compatible with UltiMaker S5, S3, UM3, and UM3E models

Y Limit Switch for UltiMaker Please note: compatible with UltiMaker 3 model

X Limit Switch for UltiMaker Please note: compatible with UltiMaker 3 model

Sliding Block / Belt Assembly length 616 for UltiMaker, compatible with UltiMaker S3 (X-axis) / 3 / 3E / 2+ Connect models.

Power Cable US Type C13 for UltiMaker, does not include Power Adapter 24V-220W (power brick), available here.

Please note: compatible with UltiMaker 2 / Extended / 2+ / Extended+ / 3 / 3 Extended models / S3 / S5

Timing Belt (Short Belt) S2M 200 for UltiMaker, belt length 200mm.

Compatible with UltiMaker 2+ / 2+ Connect / E+ / 3 / 3E / S3 / S5 models

Bowden Pack for UltiMaker.

Includes Bowden Tube, 2x Clamp Clips, and 2x Coupling Collets.

Compatible with UltiMaker 2/2+/3 series and S3 printers.

Display OLED White for UltiMaker Please note: compatible with UltiMaker 3/3E models

Clamp Clip for UltiMaker Please note: compatible with UltiMaker 2+/E+/Go/3/3E/S3/S5 models

Tube Coupling Collet for UltiMaker Please note: compatible with UltiMaker 2+/E+/3/3E/S3/S5 models

Z Limit Switch for UltiMaker Please note: compatible with UltiMaker 2+/E+/O+/3/3E models

X/Y Motor for UltiMaker. 

Compatible with the UltiMaker 2/2+/3 series.