UltiMaker S5

Produce complex parts and stunning visual prototypes quicker and more easily with the UltiMaker PVA Removal Station. Precision engineered with a magnetic rotor and adjustable speed settings, just add water to dissolve PVA support material in a matter of hours. As part of our 3D printing platform, this start-to-finish solution ensures faster design iterations with minimal operator time

• Rinsing basket dimensions 200 x 230 x 165 mm
• Rotor-powered water circulation with adjustable rotor speed
• Requires minimal maintenance and cleaning
• Removes PVA up to 4x faster than soaking in motionless water

UltiMaker Print Core CC 0.4mm, for use with abrasive materials.

Please Note: Abrasive material printing compatible with UltiMaker S-line only.

With the print core CC 0.4, you can print composite applications with the same high visual quality as you are used to, providing better printing of small features and thinner line widths to achieve high quality details and a smooth surface finish. Not recommended for filament with high amounts of chopped carbon fiber, as this may result in clogging.

UltiMaker Print Core CC 0.6mm, for use with abrasive materials.

Please Note: Abrasive material printing compatible with UltiMaker S-line only.

The print core CC 0.6 is ideal for printing composite applications that don't require a high level of detail. As this print core can print at thicker line widths, you will be benefit from a shorter print time, allowing you to have the end result faster.

Filter Housing Assembly for UltiMaker S5 / 2+ Connect Air Manager.

Officially factory refurbished, includes one year manufacturer's warranty.

Integrated composite-ready filament management solution for the UltiMaker S5 3D printer, providing humidity-controlled storage with automated detection and switching for all UltiMaker filament, and support for additional third-party filaments being added regularly.

• S5 Material Station
• 6 Spool capacity
• Humidity-controlled material
• 24/7 Reliable production

Sliding Block / Belt Assembly Y-axis length 714 for UltiMaker, compatible with UltiMaker S5 models.

Sliding Block / Belt Assembly X-axis length 920 for UltiMaker, compatible with UltiMaker S5 models.

NFC Reel Holder Assembly, compatible with UltiMaker S5.

UltiMaker Filament Guide Assembly

Please note: compatible with UltiMaker 3/3E/S3/S5

Replacement metal bracket with capacitive sensor board and capacitive sensor cable for UltiMaker.

Compatible with UltiMaker S-series printers.

This is the print head assembly for the UltiMaker S3/S5/S7. It includes the printhead cable, PCB, fans, and nozzle seal.

Compatible with UltiMaker S-line printers.

Radial (Model) Cooling Fan for UltiMaker Please note: compatible with UltiMaker 3/3E/S5 models

Axial (Hot End) Cooling Fan for UltiMaker Please note: compatible with UltiMaker 3/3E/S3/S5 models

Header Cable Clip for UltiMaker Compatible with UltiMaker S5, S3, UM3, and UM3E models

Print Table Glass for UltiMaker.

Compatible with UltiMaker S5 printers.

Silicone Nozzle Cover for UltiMaker.

Compatible with UltiMaker S-series printers.

Power Cable US Type C13 for UltiMaker, does not include Power Adapter 24V-220W (power brick), available here.

Please note: compatible with UltiMaker 2 / Extended / 2+ / Extended+ / 3 / 3 Extended models / S3 / S5

Timing Belt (Short Belt) S2M 200 for UltiMaker, belt length 200mm.

Compatible with UltiMaker 2+ / 2+ Connect / E+ / 3 / 3E / S3 / S5 models

Single Bowden Tube with 2pc Coupling Collets and 2pc Clamp Clips for UltiMaker S5 and S7.

Compatible with UltiMaker S5 and S7 printers.

Clamp Clip for UltiMaker Please note: compatible with UltiMaker 2+/E+/Go/3/3E/S3/S5 models