UltiMaker S3

UltiMaker Print Core CC 0.4mm, for use with abrasive materials.

Please Note: Abrasive material printing compatible with UltiMaker S-line only.

With the print core CC 0.4, you can print composite applications with the same high visual quality as you are used to, providing better printing of small features and thinner line widths to achieve high quality details and a smooth surface finish. Not recommended for filament with high amounts of chopped carbon fiber, as this may result in clogging.

UltiMaker Print Core CC 0.6mm, for use with abrasive materials.

Please Note: Abrasive material printing compatible with UltiMaker S-line only.

The print core CC 0.6 is ideal for printing composite applications that don't require a high level of detail. As this print core can print at thicker line widths, you will be benefit from a shorter print time, allowing you to have the end result faster.

NFC Reel Holder Assembly, compatible with UltiMaker S3.

Sliding Block / Belt Assembly Y-axis length 726 for UltiMaker, compatible with UltiMaker S3 models.

UltiMaker Filament Guide Assembly

Please note: compatible with UltiMaker 3/3E/S3/S5

Replacement metal bracket with capacitive sensor board and capacitive sensor cable for UltiMaker.

Compatible with UltiMaker S-series printers.

This is the print head assembly for the UltiMaker S3/S5/S7. It includes the printhead cable, PCB, fans, and nozzle seal.

Compatible with UltiMaker S-line printers.

Print Table Glass for UltiMaker.

Compatible with UltiMaker 2 / 2+ / 2+ Connect / 3 series and S3 printers.

Axial (Hot End) Cooling Fan for UltiMaker Please note: compatible with UltiMaker 3/3E/S3/S5 models

Header Cable Clip for UltiMaker Compatible with UltiMaker S5, S3, UM3, and UM3E models

Silicone Nozzle Cover for UltiMaker.

Compatible with UltiMaker S-series printers.

Sliding Block / Belt Assembly length 616 for UltiMaker, compatible with UltiMaker S3 (X-axis) / 3 / 3E / 2+ Connect models.

Power Cable US Type C13 for UltiMaker, does not include Power Adapter 24V-220W (power brick), available here.

Please note: compatible with UltiMaker 2 / Extended / 2+ / Extended+ / 3 / 3 Extended models / S3 / S5

Timing Belt (Short Belt) S2M 200 for UltiMaker, belt length 200mm.

Compatible with UltiMaker 2+ / 2+ Connect / E+ / 3 / 3E / S3 / S5 models

Bowden Pack for UltiMaker.

Includes Bowden Tube, 2x Clamp Clips, and 2x Coupling Collets.

Compatible with UltiMaker 2/2+/3 series and S3 printers.

Clamp Clip for UltiMaker Please note: compatible with UltiMaker 2+/E+/Go/3/3E/S3/S5 models

Tube Coupling Collet for UltiMaker Please note: compatible with UltiMaker 2+/E+/3/3E/S3/S5 models

Replacement HEPA Filter, for use with Sotec3D Cover/Door Kit for UltiMaker Printers.

UltiMaker Cleaning Filament, Pack of 10.

For use with UltiMaker 3 / S-series Print Cores.

Improve adhesion with UltiMaker adhesion sheets. Replacement pack of 25 adhesion sheets (does not include front enclosure, please see UltiMaker Advanced Printing Kit for enclosure).

For use with UltiMaker 2+ series, 3 series, and S3 printers.