Engineering Materials

With high elongation and superior tear strength, Formlabs' TPU 90A Powder is suitable for functional prototypes or durable end-use parts. Fully compatible with the Formlabs Fuse 1+ 30W.

Get the best of nylon and carbon fiber all in one high-performance material, perfect for end-use applications that require both superior stiffness and strength. Choose Formlabs Nylon 11 CF Powder to produce lightweight, rigid parts that remain structurally and thermally stable and can sustain repeated impact.

For use with Fuse 1+ 30W Printer system only, requires Fuse Sift 300 Micron Sieve.

A glass-filled material with enhanced stiffness and heat resistance to endure demanding manufacturing conditions, Nylon 12 GF Powder is ideal for parts where structural rigidity and thermal stability are critical.

For use with Fuse 1 Printer, shelf life 24 Months, media blasting required for post-processing.

Dynamism PVA is a dissolvable support material for dual-extrusion 3D printers. Print water-soluble support structures with great adhesion to PLA, Nylon, TPU, and PVB print materials, while it can also be used in combination with PETG print materials (geometry dependent).

• Natural PVA Filament
• 2.85mm Diameter, Filament Weight 1kg
• Highly recommended for PLA, Tough PLA, Nylon, TPU, and PVB, can also be used with PETG
• Should be stored in a sealed container with dessicant to avoid degradation from moisture absorption
• Recycled cardboard packaging and spool

Dynamism ASA provides an alternative to ABS for outdoor or high exposure applications needing additional UV and weather resistance, while providing similar mechanical and temperature resistant properties as ABS.

• Black ASA Filament
• 2.85mm Diameter, Filament Weight 1kg
• Features semi-glossy finish, high durability, UV and water resistant
• Bed adhesive and enclosure/enclosed printer recommended for best results
• Recycled cardboard packaging and spool

With high tensile strength, ductility, and environmental stability, Nylon 12 Powder is suitable for creating complex assemblies and durable parts with minimal water absorption.

For use with Fuse 1 Printer, shelf Life 24 Months.

BASF Ultrafuse 1.75mm PET-CF is a carbon fiber reinforced PET (Polyethylene terephthalate) with 15% carbon fiber content

Rigid 10K Resin is highly reinforced with glass to provide a tensile modulus of 10,000, ideal for precise parts needing to withstand load without bending.

Supports print resolutions: 100 and 50 microns (printer dependent). Post-curing required. Requires Resin Tank LT for Form 2.

Rigid 4000 Resin is reinforced with glass to offer very high stiffness and a polished finish. This material is highly resistant to deformation over time and is great for printing thin walls and features.

Supports print resolutions: 100 and 50 microns (printer dependent). Post-curing required. Requires Resin Tank LT for Form 2. Rigid 4000 Resin decreases the lifetime of resin tanks.

Tough 2000 Resin is the strongest and stiffest material in the Formlabs functional family of Tough and Durable Resins.

Supports print resolutions: 100 and 50 microns (printer dependent). Post-curing required. Requires Resin Tank LT for Form 2. Tough 2000 Resin decreases the lifetime of resin tanks.